Technical Data; Parts Of The Device; Control Module - Festool CSC SYS 50 EBI Manual De Instrucciones

4

Technical data

Cordless sliding table
saw
Motor voltage
Speed (no-load)
Suitable battery packs
Locating bore
Bevel angle
Cutting height at 0°
Cutting height at 45°
Cutting height at 47°
Cutting height at ‑2°
Cutting height at ‑10°
Cross cut width at 90°
Cross cut width at 45°
Cross cut width at 70°
Parallel cut width
Mitre angle
Transport dimensions
Table height
Frequency
Equivalent Isotropically
Radiated Power (EIRP)
Total weight without bat­
tery packs
* Due to manufacturing tolerances of saw blade and power tool, higher
cuts may also be possible.
5

Parts of the device

The illustrations specified are located at the be­
ginning and end of the operating instructions.
[1-1]
Gripping surface
[1-2] Cooling air opening
[1-3] Main switch
[1-4]
Status LED
[1-5] Clamp lever to fix the preset profile
setting rail
[1-6] Sliding table
CSC SYS 50
36 V
6800 rpm
Festool series
BP 18 ≥ 4 Ah
Dia. 20 mm
-10–47°
0–48 mm *
0–34 mm
*
0–33 mm *
0–48 mm *
21–32 mm
*
450 mm
340 mm
140 mm
280 mm
6
0–70°
6.1
512 x 396 x
296 mm
228 mm
2402–2480 MHz
< 10 dBm
20.2 kg
6.2
Depending on the context, different elements
are shown on the display [2-3].
[1-7]
Groove for preset profile setting rail
[1-8] Groove for Festool guide rail clamp
[1-9] Table insert
[1-10]
Hexagon socket wrench
[1-11] Non-through cutting spacer wedge
[1-12]
Spacer wedge with protective cover
[1-13] Push stick in push stick holder
[1-14]
Parallel side fence
[1-15] Cutting width scale for rip cutting
[1-16] Extension table
[1-17]
Extension table locking mechanism
[1-18]

Control module

[1-19]
Dust collection bag
[1-20] Preset profile setting rail
[1-21]
Sliding table locking lever
[1-22] Locking clip
[1-23] Systainer hood
[1-24]
Carrying handle
Control module
Elements of the control module
[2-1] Angle button
[2-2]
Height button
[2-3] Display
[2-4] Dial
[2-5]
Start switch
[2-6] Stop switch
Display elements
[2-7] Position on page X of Y (for assis­
tants)
[2-8]
Info graphic dialogue box
[2-9] Info text dialogue box
[2-10] Focus line option
[2-11]
Favourite parked position
[2-12] Cutting angle (main screen)
[2-13]
Cutting height (main screen)
[2-14] Battery pack capacity indicator
English
31