Intended Use; Device Controls And Settings - Silk’n Infinity Manual Del Usuario

1. Pulse button
2. Treatment surface
3. Skin colour sensor
4. Bluetooth indicator light
EN
5. Energy level indicator lights
6. Control button
7. Ready/Skin tone warning indicator light
8. Base electrode
9. Touch electrode

3.3 Intended use

Silk'n Infinity is intended for removal of unwanted hair. The device is also intended to
effect long term or permanent hair reduction. Permanent hair reduction is defined
as a long-term stable reduction in the number of hairs regrowing after a treatment
regime. You may use the device to remove unwanted body hair. Ideal body areas
include the underarms, bikini line, arms, legs, face (below the cheekbones), back,
shoulders and chest.
Silk'n Infinity is not a medical appliance. It is intended exclusively for cosmetic
treatments. The device is only intended for private use and is not suitable for
commercial or therapeutic use.
Do not use for any purpose other than as described in this manual.
4.

Device controls and settings

4.1 Device controls
Refer to the diagram at the front of the manual to see the location of each control.
Control
Control button (#6)
Pulse button (#1)
Touch electrode (#9)
Energy level indicator
lights (green) (#5)
Action
Short press
Short press
Short press
Constant
10
Function / Mode
Each press increases the energy
level. The default at start up is level
1. Cycle through the levels to get
back to 1.
Triggers a light pulse.
Triggers a light pulse when pressed
together with the pulse button.
The number of lights indicates the
energy level.