9.4 Dual handlebar (MA 443)
Danger of pinching!
The upper handlebar can be folded
down by releasing the quick release
caps. For this reason, always hold
the upper handlebar (2) with one
hand at its highest point when you
open the quick-release caps.
Transport position (for cleaning, for
space-saving transport and for storage of
the machine):
● Open the quick-clamping devices (1) –
fold downwards – and fold the upper
handlebar (2) forwards, ensuring that
the electric cable is not damaged.
Working position (to push machine):
● Fold up upper handlebar (2) rearwards
and hold with one hand.
● Close the quick-clamping devices (1) –
fold upwards.
9.5 Grass catcher box
Attaching:
● Open the discharge flap (1) and
hold it open.
● Attach the grass catcher box (2) to the
mountings (3) on the rear of machine by
means of the locating lugs.
● Close the discharge flap (1).
Detaching:
● Open the discharge flap (1) and hold it
open.
● Lift the grass catcher box (2) and
remove it rearwards.
0478 131 9922 C - EN
● Close the discharge flap (1).
14
9.6 Central cutting height
adjustment
Six different cutting heights
between 25 mm and 75 mm can be set.
Level 1 = lowest cutting height
Level 6 = highest cutting height
Setting cutting height:
● Hold the handle (1), pull the lever (2)
upwards and hold.
● Set the required cutting height by
moving the machine upwards and
downwards. The current cutting height
can be read off at the cutting height
indicator (3) by means of the
marking (4).
● Release the detent lever (2) and allow it
to engage.
9.7 Level indicator
The upper part of the grass catcher
box features a level indicator (1).
15
The flow of air that is created by the rotary
movement of the mowing blade and is
responsible for filling the grass catcher box
raises the level indicator (2):
The grass catcher box is filled with
clippings.
When the grass catcher box is full, this
flow of air is reduced and the level
indicator drops (3):
● Empty filled grass catcher box (
10. Notes on working with
the machine
16
10.1 General
To ensure a perfect, thick lawn, mow
regularly and keep the grass short.
Do not cut the lawn too short in hot, dry
conditions as it will dry out or burn in the
sun and become unsightly.
The cutting pattern will be better with a
sharp blade than with a blunt one; the
blade should therefore be sharpened
regularly (VIKING specialist dealer).
Cutting performance
The cutting performance (battery running
time) depends on the properties of the
grass and the selected cutting height. The
cutting performance is enhanced by the
following measures:
● Mow the lawn more frequently
● Increase the cutting height
● Reduce speed of propulsion
17
● Allow the lawn to dry before mowing.
If required, additional STIHL lithium-ion
batteries can be purchased (special
accessories).
10.2 Mowing on slopes
For safety reasons, the lawn mower
must not be used on inclines of
more than 25°. A slope inclination of
25° (46.6%) corresponds to a vertical
12.4).
height increase of 46.6 cm for a 100 cm
horizontal distance.
18
45