EdilKamin MITO IDRO Instrucciones De Uso página 46

fi g. 1
B
C
fi g. 2
B
fi xing screw
C
fi g. 3
E
COVERING INSTALLATION
A
detail of upper grille
attachment to the
structure
2) STEEL VERSION
Fig. 1
The stove is delivered (Fig. 1) with the following external com-
ponents already installed:
• metal sides (A)
• upper grille (B)
• lower panel (C)
The pieces indicated below are packaged separately.
• 1 lower horizontal ceramic element (E)
• 1 upper horizontal ceramic element (F)
• 1 ceramic top (G)
• 4 milled pins M4
• 4 washers
• 4 rubber stoppers (M)
• 4 fl at washers D 10
• 4 brass washers D 8
To t proceed as follows:
Fig. 2
Slide out the metal sides upwards to remove the upper grille
together with the frame (B) screwed onto the structure and the
interlocking lower panel (C),
After removing the fi xing screw. Re-position the previously
removed metal sides.
Fig. 3
Attach the lower horizontal ceramic element (E) using the rele-
vant slots, M4 knurled bolts and washers provided.
- 46
-