Tabla de contenido
Publicidad
w
q
e
r
t
Connecting the Machine to the Power Supply
z Turn off the power switch.
x Insert the machine plug into the machine socket.
c Insert the power supply plug into the outlet .
v Turn on the power switch to turn on the power
and sewing light.
q Power supply plug
w Power switch
e Outlet
r Machine socket
t Machine plug
CAUTION:
Before connecting the power cord, make sure
the voltage and frequency shown on the
machine conform to your electrical power.
NOTE:
While in operation, always keep your eyes on
the sewing area, and do not touch any moving
parts such as the thread take-up lever,
handwheel or needle.
Always turn off the power switch and unplug
from the power supply:
– when leaving the machine unattended.
– when attaching or removing parts.
– when clearning the machine.
Do not place anything on the foot control,
otherwise the machine will run inadvertently.
Operating Instructions (for the U.S.A and
Canada only)
This appliance has a polarized plug (one blade wider
than the other). To reduce the risk of an electric
shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not
modify the plug in any way.
Foot Controller Model YC-482J-EC or TJC-150 is
used with this machine.
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the
faster the machine runs.
6
Publicidad
Tabla de contenido
