Stihl MS 251 Manual De Instrucciones página 33

To correct a misalignment, turn the
N
cap (with the grip up) until it drops
fully into the tank opening.
Twist the cap counterclockwise as
N
far as it will go (approx. 1/4 turn) –
this will twist the base of the cap into
the correct position.
Twist the cap clockwise, closing it
N
normally – see the sections
"Closing" and "Checking for proper
closure."
If your cap still does not tighten
N
properly, it may be damaged or
broken; immediately stop use of the
unit and take it to your authorized
STIHL dealer for repair.
Filler cap with markings and symbols
Opening
Raise handle.
N
MS 251, MS 251 C
Twist filler cap counterclockwise
N
(approx. 1/4 turn).
Markings on filler cap and housing must
align.
Remove the filler cap.
N
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank – leave
approx. 1/2" (13 mm) air space.
Closing
Handle is in an upright position:
Position filler cap – markings on filler
N
cap and housing must align.
Push the filler cap down as far as it
N
will go.
Push the filler cap down and twist it
N
clockwise until it engages.
Then the markings on filler cap and
housing will align.
English
31