Stihl MS 251 Manual De Instrucciones página 49

Models with ElastoStart
Pry the cap out of the starter grip.
N
Remove the remaining rope from
N
the rotor and starter grip.
Thread the new rope through the
N
starter grip and tie a simple
overhand knot.
Pull the knot back into the grip.
N
Refit the cap in the grip.
N
Versions with Easy2Start
Remove the remaining rope from
N
the rotor and starter grip.
MS 251, MS 251 C
Thread the new rope through the
N
starter grip and tie one of the knots
shown.
Installing the Rope Rotor
1
3
Thread the end of the rope through
N
the top of the guide bushing (1) and
rope rotor (2) and secure it with a
simple overhand knot.
Coat the rope rotor bearing bore
N
with non-resinous oil.
Slip the rotor over the starter
N
post (3) – turn it back and forth to
engage the anchor loop of the
rewind spring.
English
2
47