Wiring - Invacare Sonata Manual Del Usuario

4.
In the other end of the side rail bar; push the two upper
pawls into the end of the bar.
5.
Push the attachment into the guideway until it attaches
with an audible click (=properly engaged in the lower
position).
6. Mount the lower side rail bar in both ends as in step 4.
1574228-E
7. Push the side rail in both ends, all the way up until the
upper bar locks in the upper position.
8.
Retighten the screw and tab under the lower side rail
bar, in each corner of the bed ends.

3.7 Wiring

IMPORTANT!
Not correctly drawn wires can be damaged when
operating the sections with the motors.
– All wires must be kept clear of the floor and
must not block the castors.
– All wires (motors, hand control and mains) must
be connected to the control box
– The locking cam must be attached over the
plugs in the control box.
Connect the mains wire plug to the 230 V socket.
Setup
13