Hybrid (Online/Pc-Controlled) Mode - Interacoustics AC40 Manual De Instrucciones

AC40 Instructions for Use - EN

3.10 Hybrid (Online/PC-Controlled) Mode

The following screen shots show the Diagnostic Suite AUD tab when running AC40 in "hybrid mode".
This mode allows for the AC40 to be "on-line" connected to the PC – i.e. a trued hybrid audiometer:
•
Operate the unit via a PC and
•
Operate the PC via the unit
The AC440 operational manual (found on www.interacoustics.com/Equinox) explains in more detail how
the AUD module works when running it in hybrid mode. Please note that the AC440 manual is covering
the full clinical AC440 module for the Equinox and Affinity PC-based audiometers, so some features will
not be present in the AC40 Diagnostic Suite AUD module.
The protocol settings of the Diagnostic Suite AUD module can be modified under the AC440 setup:
'
Page 44