Interacoustics AC40 Manual De Instrucciones página 23

AC40 Instructions for Use - EN
57 HL dB Channel 1
58 Masking Channel 2
59 Tone Switch / Enter
Channel 1
60 Tone Switch / Enter
Channel 2
This allows for the adjusting of the intensity in channel 1 shown at
(8) in the display.
Adjust the intensity level in channel 2 or masking levels when
masking is used. Shown at (9) in the display.
Used for tone presentation where the "Tone" light for channel 1 (5)
will show. Can also be used as "Enter" (selection) button when
selecting settings, patient name characters etc.
Used for tone presentation where the "Tone" light for channel 2 (6)
will show. Can also be used as "Enter" (selection) button when
selecting settings, patient name characters etc.
Page 15