Interacoustics AC40 Manual De Instrucciones página 19

AC40 Instructions for Use - EN
21 Del Point /
del curve
22 Save Session/
New Session
23 Print
Clients
Note that the tests available in this list depends on the test
licenses installed on the instrument. This may also vary from
country to country.
Delete points during testing by selecting a point using the "Down"
(55) and "Up" (56) buttons and pressing the "Delete Point" button.
Delete the entire test curve of a graph by holding "Shift" (18) and
pressing the "Del Point" button.
Save a session after testing or alternatively create a new session
by holding "Shift" (18) and pressing the "Save Session" button.
In the Save Session menu it is possible to save sessions, delete
and create clients and edit client names.
The maximum capacity is 1000 clients. Please see section below
for a screenshot of the Save Session dialogue.
Allows results to be printed directly after testing (via a supported
USB printer – please contact Interacoustics customer service for a
list of supported PC printers if in doubt). The printout logo can be
configured via the Diagnostic Suite (in the General Setup a logo
image can be downloaded to the instrument from the PC). Please
refer to the Diagnostic Suite manual.
Page 11