3M Secure Click D3000 serie Instrucciones De Uso página 4

Storage Conditions and Shelf Life
Before use, store filters in the original packaging away from contaminated areas, dust, sunlight, extreme temperatures, excessive moisture and
damaging chemicals. When stored in accordance with temperature and humidity conditions specified below, the filter may be used until the "use by"
date specified on packaging. Always inspect product and conduct a user seal check before use as specified in the respirator User Instructions. If you
cannot achieve a proper seal, do not enter the contaminated area. See your supervisor.
End of Shelf Life
Requester: Susan Anderson
Creator:
deZinnia_20132
+86˚F
File Name: 20132-18_Install Filters_PSD.ai
+30˚C
Structure #: Illustration
Storage Temperature Range
Date: 03/02/18
-4˚F
-20˚C
This artwork has been created as requested by 3M. 3M is responsible for the artwork
AS APPROVED and assumes full responsibility for its correctness.
Storage Maximum Relative Humidity <80% RH
< 80%
NIOSH Approved: Hydrogen Fluoride P95, D3076HF: At least 95% filtration efficiency against solid and liquid aerosols including oils.
Fig. 1
Printed Colors – Front:
Use filters before the "use by" date specified on packaging
Scale:
1 Inch
-20°C (-4°F) to +30°C (+86°F)
Fig. 2
3
(English)
Fig. 3