aldes Dee Fly Instrucciones De Montaje página 32

ASSEMBLY
Connection to technical elements (heat exchanger and motor unit)
Connector
Insulated flexible
Attach the inner duct to the
connector using a collar.
Clip
Motor unit Dee Fly
Attach the insulator and the outer duct and tighten it with the fixing collar
Make sure the duct is properly fitted and sealed.
Roof-mounted exhaust
• Shape the lead sheets to match the contours of the roof, avoiding
crimped edges.
• If the roof is slated/tiled, the lead sheeting should be locked in
place along the lintels.
• The rain-cover hood must be fitted with a flow of air
perpendicular to the slope of the roof.
Fresh air inlet
• Preferentially to be located on the façade of the
building
• Use a wall-mounting air grille with low pressure
losses, type AWA 300x300 for example.
32