How To Add Salt To The Pool - Zodiac Jandy Pro TruClear Manual De Instalación Y Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Jandy
Pro Series TruClear
®
It is important to note that certain materials used in and
around swimming pools and spas may not be compatible
with chemicals commonly used to purify pool and spa
water (e.g. acids, chlorine, salt, stabilizers, etc.).
Zodiac Pool Systems, Inc. does not warrant or guarantee
that the chlorinated water generated by the Jandy Pro
Series chlorine generating device will not damage or
destroy certain types of plants, decking, coping and
other materials in and around your pool and/or spa.
Before selecting materials to be used in and around your
pool and/or spa, please discuss all options with your
contractor to assess the compatibility of such materials
and chemicals. When mixing acid with water, ALWAYS
ADD ACID TO WATER. NEVER ADD WATER TO ACID.
Some helpful considerations may include:
• Choosing plants that can withstand splash out of pool
water containing chlorine and/or salt and other water
purifi cation chemicals.

How to Add Salt to the Pool

1.
Turn on pump to circulate pool water.
2.
IMPORTANT - Turn the power pack off by
pressing and holding the ON/Off button for
6 seconds.
3.
Test the water for salinity level using test strips,
electronic meter, or by your local pool professional.
4.
Use the Table 1 to determine the amount of salt to
add. Be conservative when adding salt as it is easier
to add more if needed than it is to dilute if there is
too much salt.
NOTE
For a new pool or newly resurfaced pool it is recommended to wait at least 30 days (surface should be completely cured)
before adding salt. Follow the pool surface manufacturers guidelines for your particular pool. For vinyl and fiberglass pools,
salt can be added at start up.
Table 1.
Approximate Pounds and Kilograms of Salt Needed to Obtain 3.0 gpl (3,000 ppm)
Current
Salt
10,000 gal
Level
ppm
(38,000 L)
0
250 lbs
(114 kgs)
250
229 lbs
(104 kgs)
500
209 lbs
(95 kgs)
750
188 lbs
(85 kgs)
1000
167 lbs
(76 kgs)
1250
146 lbs
(66 kgs)
1500
125 lbs
(57 kgs)
1750
104 lbs
(47 kgs)
2000
83 lbs
(38 kgs)
2250
63 lbs
(28 kgs)
2500
42 lbs
(19 kgs)
2750
21 lbs
(9 kgs)
3000
Optimum
|
Chlorine Generating System
Installation & Operation Manual
CAUTION
Pool/Spa Size - US Gallons (Litres)
15,000 gal
20,000 gal
(57,000 L)
(76,000 L)
376 lbs
(170 kgs)
501 lbs
344 lbs
(156 kgs)
459 lbs
313 lbs
(142 kgs)
417 lbs
282 lbs
(128 kgs)
376 lbs
250 lbs
(114 kgs)
334 lbs
219 lbs
(99 kgs)
292 lbs
188 lbs
(85 kgs)
250 lbs
156 lbs
(71 kgs)
209 lbs
125 lbs
(57 kgs)
167 lbs
94 lbs
(43 kgs)
125 lbs
63 lbs
(28 kgs)
83 lbs
31 lbs
(14 kgs)
42 lbs
Optimum
• All metal components used in and around a pool should
be of a high grade, quality stainless steel.
• Careful selection of masonry products. The porosity
and hardness of natural stones varies greatly.
Therefore we recommend you consult with your
builder or stone contractor on the best choice for stone
materials around your pool or spa.
• Sealing all masonry products. Professionals in
the stone industry specify that even natural stone,
especially when used outdoors, be sealed to prevent
weathering, staining, and premature degradation.
Consult with your stone or deck contractor for the
proper sealer for the masonry products you have
selected to use around your pool or spa.
• For optimal results, sealers should be reapplied on
a regular basis. Reapply the protective sealer on a
schedule per the manufacturer's instructions.
• Use of chemicals other than those recommended may
be hazardous. Follow the chemical manufacturers
instructions.
5.
Disperse salt into pool. Do not add through
skimmer, main drain, or surge tank. Brush the
salt around the pool to facilitate dissolving.
Circulate fi lter system for 24 hours to ensure even
distribution.
6.
After 48-72 hours, verify correct salt reading by
testing the water salinity level using test strips,
electronic meter, or by your local pool professional.
7.
When the salinity level is correct, turn the power
pack on. Press the
production rate.
25,000 gal
(95,000 L)
(227 kgs)
626 lbs
(284 kgs)
(208 kgs)
574 lbs
(260 kgs)
(189 kgs)
522 lbs
(237 kgs)
(170 kgs)
469 lbs
(213 kgs)
(151 kgs)
417 lbs
(189 kgs)
(132 kgs)
365 lbs
(166 kgs)
(114 kgs)
313 lbs
(142 kgs)
(95 kgs)
261 lbs
(118 kgs)
(76 kgs)
209 lbs
(95 kgs)
(57 kgs)
156 lbs
(71 kgs)
(38 kgs)
104 lbs
(47 kgs)
(19 kgs)
52 lbs
(24 kgs)
Optimum
Optimum
ENGLISH
buttons to set the desired
30,000 gal
35,000 gal
(114,000 L)
(132,000 L)
751 lbs
(341 kgs)
876 lbs
688 lbs
(312 kgs)
803 lbs
626 lbs
(284 kgs)
730 lbs
563 lbs
(256 kgs)
657 lbs
501 lbs
(227 kgs)
584 lbs
438 lbs
(199 kgs)
511 lbs
376 lbs
(170 kgs)
438 lbs
313 lbs
(142 kgs)
365 lbs
250 lbs
(114 kgs)
292 lbs
188 lbs
(85 kgs)
219 lbs
125 lbs
(57 kgs)
146 lbs
63 lbs
(28 kgs)
73 lbs
Optimum
Optimum
Page 19
(397 kgs)
(364 kgs)
(331 kgs)
(298 kgs)
(265 kgs)
(232 kgs)
(199 kgs)
(166 kgs)
(132 kgs)
(99 kgs)
(66 kgs)
(33 kgs)

Publicidad

Tabla de contenido
loading

Tabla de contenido