Combination Possibilities - Ottobock Myo Plus Instrucciones De Uso

Myo Plus TR
2

2.3 Combination possibilities

This product can be combined with the following Ottobock components:
Terminal devices
• System Electric Hand DMC plus: 8E38=6,
8E39=6, 8E41=6
• Sensor Hand Speed: 8E38=8, 8E39=8,
8E41=8
• MyoHand VariPlus
8E39=9, 8E41=9
INFORMATION
The 13E190=* switch block has to be used for combination with the 8E34=*, 8E39=*, 8E41=*
and 8E71=* terminal devices.
• bebionic hand EQD: 8E70=*
• bebionic hand Short Wrist: 8E71=*
INFORMATION
Connected terminal devices must be in a proportional 2-channel mode.
Active rotation
• 10S17 electric wrist rotator
• 10S1=* lamination ring
Passive rotation
• 9E169 coaxial plug
• 10S4 coupling piece
• 10S1=* lamination ring
3 Application
3.1 Indications for use
Myo Plus is to be used exclusively for exoprosthetic fittings of the upper limbs.
3.2 Conditions of use
The product was developed for everyday use and must not be used for unusual activities such as
extreme sports (free climbing, paragliding, etc.). Furthermore, the product must not be used for
the operation of motor vehicles, heavy equipment (e.g. construction machines), industrial
machines or motor-driven equipment.
22
Speed: 8E38=9,
The Myo Plus TR receives the signals from the
remote electrodes and converts them into con­
trol signals for the prosthesis components
(hand, rotation). Up to 8 remote electrodes can
be connected to the Myo Plus TR.
• Transcarpal Hand DMC plus: 8E44=6
• System Electric Greifer DMC VariPlus:
8E33=9, 8E34=9
• DMC VariPlus System Electric Greifer:
8E33=9-1, 8E34=9-1
• bebionic hand Flex: 8E72=*