Navigation Menu; Performing Basic Calibration - Ottobock Myo Plus Instrucciones De Uso

7.3.1 Navigation menu

5

7.4 Performing basic calibration

The following steps have to be completed to start calibration:
1) Tap the navigation menu.
2) Tap the "Login" menu option.
3) Log on with the specialist user access data.
4) Tap the menu item "Basic set".
5) Enter all parameters (e.g. use of an electric wrist rotator, fitting side, number of installed elec­
trodes...).
6) Set the pause time between the movements.
INFORMATION: The pause time should be adapted according to the patient (inexperi­
enced patient – maximum, experienced patient or difficult arm position – minimum).
7) Tap " " to start recording the calibration data.
8) Perform all 6 sets.
INFORMATION: Perform all recordings in the illustrated arm position.
9) Save the classifier data.
INFORMATION: The classifier data must be saved before the patient can go home.
INFORMATION
During the pause time, the patient has to relax their musculature without changing the arm posi­
tion. For data recording, the muscle tension has to be increased up to the end. The maximum
muscle tension should not be too high, since the patient has to be able to easily reach this ten­
sion again when using the prosthesis.
8 Use
All electrode signals are displayed in the Myo Plus app via the Myo Plus TR.
The product is set up and configured via the Myo Plus app.
All information on use is found in the menu texts of the app and in the online help.
Tap the symbol in the menus to display the navigation menu.
Additional settings for the connected component can be con­
figured in this menu.
The navigation menu is divided into 3 main menu items:
1. Device
2. General
3. Enable O&P professional mode
See the online help for further information about the respective
submenus.
31