Myo Plus App; System Requirements; Initial Connection Between Myo Plus App And Component - Ottobock Myo Plus Instrucciones De Uso

INFORMATION
To supply power to the product in combination with the terminal devices 8E70=* bebionic hand
EQD, 8E71=* bebionic hand Short Wrist and 8E72=* bebionic hand, only the 757B35=3, =5
MyoEnergy Integral batteries are recommended.
For information about charging the prosthesis, observe the battery instructions for use.

7 Myo Plus app

With the Myo Plus app, the user can change the behaviour of the product to a cer­
tain extent. The user can adapt the product to conditions on the current day and
adjust the movements through calibration. A menu item in the app allows the user
to train their muscle signal.
INFORMATION
The Myo Plus app can be downloaded free of charge from the respective online store. To down­
load the Myo Plus app, the QR code on the supplied Bluetooth PIN card can be read with the
mobile device (requirement: QR code reader and camera).

7.1 System Requirements

The functioning of the app is assured on devices that support the following operating systems:
iOS (for iPhone, iPad, iPod): version 9.3 or higher. The mobile device has to support
•
Bluetooth 4.0 (BT LE).
Android: version 5.0 or higher
•
The functionality was tested on the following devices:
• Apple iPhone 5, iPhone 6 Plus, iPhone 6s, iPhone 7, iPhone 8 Plus, iPhone X, iPod
Touch Generation 5, iPod Touch Generation 6
• Samsung Galaxy S5, Galaxy S7 Edge, Galaxy S8, Galaxy Note 3, Galaxy A3 (2016),
Galaxy A3 (2017), Galaxy Tab A, Galaxy Tab S
• Sony Xperia Z, Xperia Z1
Xiaomi Mi A1, Redmi Note 3
Acer Iconia One
Amazon Fire 10
Blackberry Keyone
Google Nexus 6, Pixel
Huawei P9 Lite, P10
LG Optimus G4, Optimus V30
Motorola Moto X, Moto G3, Moto G5 Plus
One Plus 5T

7.2 Initial connection between Myo Plus app and component

The following points should be observed before the initial connection:
• Bluetooth of the device must be switched on.
• The serial number and Bluetooth PIN of the component being connected must be known.
They are found on the enclosed Bluetooth PIN card. The serial number begins with the letters
"SN".
29