Ottobock Myo Plus Instrucciones De Uso página 24

WARNING
Use of the product in hazardous workplaces (e.g. machinery workplaces)
Injuries due to involuntary muscle contractions.
► Switch off the product before working in hazardous workplaces.
WARNING
Use of the product while operating a vehicle
Accident due to unexpected behaviour of the product.
► The product must not be used for the operation of motor vehicles and heavy equipment (e.g.
construction machines).
WARNING
Use of the product while handling a firearm.
Injury or fatal injuries due to unexpected product behaviour.
► Do not handle firearms while using the product.
WARNING
Use of inappropriate components
Injury due to malfunction of the product.
► Operate the product only with components prescribed by the manufacturer. You can find the
list of components in the section "Combination possibilities".
► Operate the product only with accessories recommended by the manufacturer. You can find
the list of components in the section "Scope of delivery and accessories".
WARNING
Independent user changes or modifications made to the product
Injury due to faulty operation or malfunction of the product.
► Have any changes or modifications to the product carried out only by Ottobock authorised,
qualified personnel.
► The product and any damaged components may only be opened and repaired by Ottobock
authorised, qualified personnel.
CAUTION
Penetration of dirt and humidity into the product
Injury due to faulty control or malfunction of the product.
► Ensure that neither solid particles nor liquids can penetrate into the product.
► Make sure that the plug connections are sealed with silicone grease.
CAUTION
Mechanical loads
Injury due to faulty control or malfunction of the product.
► Do not subject the product to mechanical vibrations or impacts.
► Check the product and its housing for visible damage (e.g. cracking or breakage). If the
product is damaged or does not function properly, contact your Ottobock Service Centre.
► Watch for loosened electrode domes.
► Secure the remote electrodes and cables on the inner socket using suitable material (such
as adhesive tape) to reduce cable movement.
24