Maintenance, Cleaning, Repairs And - Viking ME 339 Manual De Instrucciones

Ocultar thumbs Ver también para ME 339:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 99
A slope inclination of 25° corresponds to a
vertical height increase of 46.6 cm for a
100 cm horizontal distance.
Beware of the work tools
running on for several seconds
before coming to a standstill.
Do not try to examine the blades
while the lawn mower is
operating. Never open the
discharge flap and/or remove the grass
catcher box when the mowing blade is
running. Rotating blades can cause injury.
Never attach any objects to the handlebar
(e.g. work clothing). Extension cables
must never be wrapped around the
handlebar.
Regularly check that the blade is securely
fastened and is not damaged or worn in
any way (
12.5).
Caution – risk of injury!
Never put hands or feet on or
underneath rotating parts.
Never touch the rotating blade.
Always keep away from the discharge
opening. Always observe the safety
distance provided by the handlebar.
Avoid switching on the machine repeatedly
within a short period of time; in particular
avoid "playing" with the start button. Risk
of motor overheating.
0478 121 9917 E - EN
Owing to the voltage fluctuations caused
by this machine during the run-up period,
other devices connected to the same
circuit may be subject to interference in the
case of unfavourable power supply
conditions. In this case, appropriate steps
should be taken (e.g. connection to a
different circuit than the one used by the
affected device, or operation of the
machine using a circuit with a lower
impedance).
Switch off the motor, disconnect
the mains plug and ensure that
the cutting tool has come to a
complete standstill
– before remedying blockages, including
those in the discharge chute,
– if the cutting tool has hit a foreign object.
The cutting tool needs to be checked for
possible damage. The lawn mower
must not be operated with a damaged
or bent blade shaft or motor shaft. Risk
of injury through defective parts!
– Before you check, clean or carry out
work on the mower, e.g. adjusting the
cutting height, opening or closing the
discharge flap;
– If the mower begins to vibrate
excessively. In this case, the complete
machine, in particular the cutting tool
must be checked for possible damage
and loose parts. Damaged parts must
be replaced prior to further use, loose
parts must be fastened/tightened.
– Before leaving the machine
unattended;
– Before lifting, or carrying the machine;
– Before transporting the machine.
Never lift or carry a mower with the motor
running or the mains lead connected.
It is not permitted to transport anything or
anyone, particularly children, on the
machine.

4.5 Maintenance, cleaning, repairs and

storage
Before performing any work on
the machine, before adjusting or
cleaning the mower, or before
checking whether the electric cable is
entwined or damaged, switch off the
mower and disconnect the plug.
Always wear thick gloves when
carrying out any work on the
cutting tool.
Allow the machine to fully cool down
before storing it in an enclosed space,
performing maintenance on it or cleaning
it.
Perform only those maintenance
operations that are described in this
instruction manual. Have all other
operations carried out by a specialist
dealer.
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.
If you do not have the necessary expertise
or auxiliary equipment, please always
contact a specialist dealer. (VIKING
recommends VIKING specialist dealers).
Only use high quality tools, accessories
and spare parts. Otherwise, there may be
a risk of accidents resulting in personal
injury or damage to the machine.
31

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Me 339 c

Tabla de contenido