Service Schedule; Handover Confirmation - Stihl RT 4082 Manual De Instrucciones

Ocultar thumbs Ver también para RT 4082:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 297
Fault:
Mowing blade does not switch on/does not
turn.
Possible cause:
– The safety devices are preventing
activation of the mowing blade.
– V-belt (mowing deck) worn, detached or
defective.
Remedy:
– Check whether all the safety
requirements for activation of the
mowing blade are met. (
– Check V-belt (mowing deck) and
replace if necessary. ( )
Fault:
Engine cuts out when mowing deck
activated.
Possible cause:
– User not sitting or not properly
positioned on driver's seat.
– Seat switch or wiring defective.
– Grass catcher box switch not actuated
or defective.
Remedy:
– Sit on driver's seat or change seat
position.
– Repair/replace seat switch or wiring.
( )
– Install grass catcher box or deflector
(not included in standard equipment), or
repair/replace grass catcher box switch.
( )
0478 193 9904 A - EN
Fault:
Mowing deck disengaged when mowing in
reverse driving direction.
Possible cause:
– Reverse mowing safety switch not
pressed.
Remedy:
– Release the mowing blades within the
time window (5 seconds before to
1 second after engaging the mowing
deck or changing the driving direction).
11.)
(
8.4)
Fault:
Engine cuts out when user leaves driver's
seat.
Possible cause:
– Parking brake not engaged.
– Mowing deck engaged (safety device).
Remedy:
– Engage the parking brake before
leaving the driver's seat. (
– Disengage the mowing deck before
leaving the driver's seat. (
Fault:
Three acoustic signals sound in quick
succession.
Possible cause:
– Fault in seat switch or electrics (short
circuit).
Remedy:
– Turn ignition key to "engine off"
position, carry out self-diagnosis.
(
9.1)
Fault:
Continuous tone sounding.
Possible cause:
– Grass catcher box full.
– Electronics fault.
– Battery connected with incorrect
polarity.
Remedy:
– Disengage the mowing deck and empty
the grass catcher box. (
– Turn the ignition key to the "engine off"
position, carry out self-diagnosis.
(
9.1)
– Check the polarity of the battery
connections, connect wiring correctly if
necessary. (

23. Service schedule

23.1 Handover confirmation

8.10)
8.3)
12.9)
14.19)
113

Publicidad

Tabla de contenido
loading

Tabla de contenido