Abicor Binzel ABIPLAS WELD CT Serie Manual De Instrucciones página 28

3 Product description
Type of cooling
Tungsten electrode E3, standard
Tungsten electrode E3, optional
Ø
Length of the cable assembly, standard
Tab. 2 Product-specific torch data (EN 60974-7)
Plasma gas
(argon, argon/helium, helium)
Shielding gas
(inert gas or inert/active gas mixtures)
Tab. 3 Process gases according to DIN EN ISO 14175
Type of voltage
Polarity of the tungsten electrode
Polarity of the workpiece
Operating voltage
Welding current at 100 % duty cycle
Tab. 4 Main arc
®
Type ABIPLAS WELD
Type of voltage
Polarity of the tungsten electrode
Polarity of the plasma nozzle
Arc current
Tab. 5 Pilot/main arc
Max. supply temperature
Min. flow rate
Inlet pressure
Coolant value
Recommended coolant
Tab. 6 Torch cooling information
EN - 6
L = 57 mm
L = 75 mm/100 mm
Ø 1.6/2.4/3.2 mm
Up to 8.0 m. Further lengths on request.
0.2–2.0 l/min
4.0–12.0 l/min
DC direct voltage
Cathodic (−)
Anodic (+)
10–40 V
15–150 A
150 CT20
DC direct voltage
Cathodic (−)
Anodic (+)
2–10 A
45 °C
1.5 l/min
Min. 3 bar, max. 4 bar
Max. 30 µS/cm
ABICOR BINZEL coolants from the BTC range
®
ABIPLAS WELD CT
Liquid
L = 75 mm
/
Ø 3.2/4.0/4.8/5.0 mm
1.0–5.0 l/min
4.0–20.0 l/min
80–250 A
250 CT20
4–15 A
20 °C (active recooling
system required)
2.0 l/min
BAL.0128 • 2019-09-04