Putting Into Operation - Abicor Binzel ABIPLAS WELD CT Serie Manual De Instrucciones

6 Putting into operation

6 Putting into operation
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance, servicing,
assembly, disassembly and repair work:
• Switch off the power source.
• Close the gas supply.
• Close off the coolant supply.
• Disconnect the coolant supply and return hoses.
• Disconnect all electrical connections.
DANGER
Risk of injury and device damage when handled by unauthorised persons
Improper repair work and modifications to the product may lead to serious injuries and
damage to the device. The product warranty will be rendered invalid if work is carried out on
the product by unauthorised persons.
• Only qualified personnel are permitted to perform work on the device or system.
NOTICE
• Note the following instructions:
 3 Product description on page EN-5
EN - 10
®
ABIPLAS WELD CT
BAL.0128 • 2019-09-04