®
ABIPLAS
WELD CT
• Can be set for all electrode diameters.
• Offers continuous angle adjustment.
9.2 Cable assembly
1 Check screw and plug-type connections for visible damage and tight fit and replace them if
necessary.
WARNING
Risk of injury
Serious injuries may be caused by parts swirling around.
• When cleaning with compressed air, wear suitable protective clothing, in particular safety
goggles.
CAUTION
Material damage
Impurities destroy the inside of the welding torch.
• Never blow compressed air into the nozzles from the front.
2 Clean lines by blowing compressed air through them from behind.
10 Troubleshooting
DANGER
Risk of injury and device damage when handled by unauthorized persons
Improper repair work and modifications to the product may lead to serious injuries and
damage to the device. The product warranty will be rendered invalid if work is carried out on
the product by unauthorized persons.
• Only qualified personnel are permitted to perform work on the device or system.
Please observe the attached 'Warranty' document. In the event of any doubts and/or problems,
please contact your retailer or the manufacturer.
NOTICE
• Consult the documentation for the welding components.
BAL.0128 • 2019-09-04
10 Troubleshooting
EN - 21