Classeq P500 Manual De Usuario página 30

Problem Possible Cause
Cycle runs for a Rinse water not hot
long time. enough.
Warewasher runs
through a full cycle
but does not rinse.
Warewasher Wrong Drain Plug
overflowing. fitted.
E16
Filters blocked.
There is a problem
with the drains
system.
24
Solution / Check
The warewasher
has a heat
interlock to
ensure that the
rinse is in
accordance with
UK environmental
health
requirements.
This will extend
the wash cycle if
the Rinse Boiler
has not achieved
the required
temperature
If rinse water is
not hot enough
Fill/Heat indicator
will be flashing
amber.
Check Rinse Tank
temperature on
Control Panel
display.
Please refer to the
latest version of
the Engineers
Manual on the
Classeq website
for full
information
regarding
temperatures and
interlock settings.
If the warewasher
runs through a
full cycle, but
does not rinse,
you will need to
request a service
callout to identify
the root cause of
the problem.
Check that the
Drain Plug is the
right one for the
warewasher
(►4.8).
Check the Filters -
if blocked remove
and clean
thoroughly.
Check that the
warewasher
waste hose is not
kinked or blocked.
Check that the
site waste is not
blocked.
Classeq Pass Through Range - User Manual
Problem Possible Cause
Poor wash results. Warewasher not
being supplied with
soft water.
There is a problem
with the wash and
rinse aid chemicals
system.
Warewasher not
properly cleaned.
Warewasher does Filters blocked.
not drain.
.
Solution / Check
If the warewasher
continues to
overflow isolate
the warewasher
and request a
service callout.
Check the
operation of the
Water Softener
(external or
internal) if fitted.
If external,
regenerate the
Water Softener.
If internal, check /
refill the Salt
Reservoir.
Check the level of
chemicals within
the detergent and
rinse aid bottles.
Ensure the bottle
weights and tubes
are correctly
positioned.
Check the
chemical dosing
rates are correctly
set (►5.3).
Ensure that the
warewasher is
regularly cleaned
(►7.2).
Check for
presence of beige
or black film
deposits around
the hood of the
warewasher
indicating a build
up of growing
yeast cells.
Check glasses and
renovate if
required.
Check the Filters -
if blocked remove
and clean
thoroughly.