Classeq P500 Manual De Usuario página 31

Classeq Pass Through Range - User Manual
Problem Possible Cause
There is a problem
with the drains
system.
Ball in anti-syphon
device dirty /
blocked (pumped
drain warewashers
only).
Warewasher will There is a problem
not turn off when with the
the On/Off button warewasher's
is pressed. control / electrical
system.
Solution / Check
Check that the
warewasher
waste hose is not
kinked or blocked.
Check that the
site waste is not
blocked.
Correct drain
procedure is
being used for the
warewasher type
(►6.9).
Gently clean the
ball by inserting
and agitating a
small bottle
brush, flush using
a trigger spray
bottle with a jet
nozzle.
Isolate the
electrical supply
to the
warewasher, turn
off the water
supply, and
request a service
callout.
UK
25