Attaching To A Tripod - Sony UPX-2000 Manual De Instrucciones

Preparations

Attaching to a tripod

20
AC power operation
You can use the camera on AC power by using the supplied AC-V615 AC
power adaptor/charger. Connect the DC OUT connector of the AC power
adaptor/charger and the DC 8.4V IN connector (inside the cover) of the
supplied lens via the supplied cable. If the supplied lens is not used,
connect to the DC 8.4 V IN jack of the camera (inside the cable cover).
For connection, you must remove the cable cover and disconnect the plug
already connected to the DC 8.4V IN connector.
For details, see "Removing and reattaching the cable cover," page 31.
You can attach the camera to a tripod using the tripod screw hole on the
bottom of the camera. If a commercially available quick shoe is attached
to the camera, you can easily attach and detach the camera.
Tripod
Size of the quick shoe that can be used
Lens side
50 mm or less
Quick shoe
32 mm or less
26 mm or less
Thickness: 14 mm or less
Inst SS Ver.4.0 3-865-646-14(1)