Installation - Sony UPX-2000 Manual De Instrucciones

Precautions

Installation

Condensation
Location
On transportation
10
• Avoid placing the printer or camera in a location subject to:
— mechanical vibration
— high humidity
— excessive dust
— where it is exposed to rain
— direct or excessive sunlight
— extremely high or low temperatures
— close to sources of strong magnetism
— close to sources of powerful electromagnetic radiation, such as radios
or TV transmitters
• Do not use other electronic equipment near the printer. It will not work
properly in strong electromagnetic fields.
• Do not place a heavy object such as a monitor on the printer.
• Keep the AC power adaptor/charger away from AM receivers, because it
will disturb AM reception.
• If the printer is subject to wide and sudden changes in temperature, such
as when it is moved from a cold room to a warm room or when it is left in
a room with a heater that tends to produce large amounts of moisture,
condensation may form inside the printer. In such cases the printer will
probably not work properly, and may even develop a fault if you persist
in using it. If condensation forms, turn off the power and leave the
printer to stand for at least one hour.
• If the printing pack is subjected to wide and sudden changes in
temperature, condensation may form on the ink ribbon or paper. This
will cause the printer to malfunction. Also, if the printing pack is used in
this state, spots are likely to appear on the printout. Therefore, avoid
storing the printing pack in locations subject to wide and sudden changes
of temperature.
• To store a half-used printing pack, replace it in its original packing and
reseal the package. If possible, keep the sealed printing pack in a cool,
dark location. To subsequently use the printing pack, place it, in its
sealed package, in a warm room for several hours. Doing so prevents
condensation from forming when the printing pack is removed from its
package.
To prevent internal heat built-up, leave enough room around the printer for
air to circulate through the vents on the left hand side of the cabinet.
• Do not transport the printer with the supplied accessories. Doing so may
cause malfunction.
• Retain the original carton and packing materials in case you have to
transport the unit in the future.
Inst SS Ver.4.0 3-865-646-14(1)