Delete Last Total; Clear Total; Display Unit Switch - Baxtran STA Serie Manual De Usuario

STA/STR/STC
The scale is switched into
The screen flashes current TOTAL, for example, 3205kg.
CONDITION
The scale must not be in
The TOTAL must be greater than 0 (or 0.0 or 0.00, depending on the resolution). Otherwise, error mes-
sage
To learn how to operate in View Total Mode, please refer to View Total Mode of Scale's Mode in
6Advanced Operation section.

DELETE LAST TOTAL

ACTION
To delete the last accumulated weight reading, press
FUNCTION
If the last totaled weight was a mistake, it can be erased by
totaled value.
The screen displays the below message, indicating that the last
CONDITION
The scale must not be in
Last Total
The must be greater than 0 (or 0.0 or 0.00, depending on the resolution) or has not been
deleted. Otherwise, error message

CLEAR TOTAL

ACTION
To clear the overall Total, press
FUNCTION
In order to start a new series of Totals, the old
The screen displays the below message, indicating that the
CONDITION
The scale must not be in

DISPLAY UNIT SWITCH

ACTION
To change the scale's
button on scale or
FUNCTION
The scale switches to
Display unit switching
The screen flashes the unit to change, and returns to
The lb indicator lights on, after
view total mode.
HOLD mode. Otherwise, error message
will flash.
HOLD mode. Otherwise, error message
and
HOLD mode. Otherwise, error message
display unit, press
on remote controller in turn.
2nd mode, and then recognizes
toggles between kg (metric system) and lb (imperial system).
display unit
on remote controller.
delete last
TOTAL
will flash.
on remote controller in turn.
TOTAL can be erased completely by
TOTAL
2ND button on scale or
ZERO action as
weighing mode.
switches to lb.
will keep flashing.
total. This erases only the last
is successfully deleted.
will flash.
CLEAR
is successfully erased.
will keep flashing.
on remote controller, and
display unit switching
User's Guide
TOTAL.
ZERO
action.
43