User's Guide
CONDICIÓN
The scale must not be in
The scale must be stable. Otherwise, error message
Current weight reading is in
To learn more about Manual-Zero Range, please refer to Scale Configuration function.
TARE IN
ACTION
To
tare in
scale is in
FUNCTION
The scale stores a tare weight, and shifts to
the tare value.
The
TARE
The weight reading turns to "0" (or "0.0" or "0.00", depending on the resolution).
CONDITION
The scale must not be in
The scale must be stable. Otherwise, error message
Current weight reading must be greater than 0 (or 0.0 or 0.00, depending on the resolution). Otherwise,
error message
Current weight reading must be fewer than 100% scale's MAXIMUM CAPACITY. Otherwise, error message
The scale must be in gross mode. Otherwise, this action will be recognized as
NOTICE:
Setting or changing TARE has no effect on the ZERO setting.
NOTICE:
Tareing will reduce the apparent overloading range of the scale.
For example, if a 1000kg container is tared and the scale maximum capacity is 5000kg,
the scale will overload at a new weight of 4009kg (5000 – 1000 + additional 9 divisions).
TARE OUT
ACTION
To
tare out
the scale is in
FUNCTION
The scale clears the tare weight, returns to gross mode, and displays all subsequent readings in
mode.
The
TARE
The weight reading is added with tare weight.
CONDITION
The scale must not be in
The scale must be in
HOLD
ACTION
To
HOLD
38
HOLD
mode. Otherwise, error message
manual-zero
a tare weight into scale, press
GROSS
MODE).
indicator lights on.
HOLD
mode. Otherwise, error message
will flash.
will flash.
the tare weight out of scale, press
NET
MODE).
indicator lights off.
HOLD
mode. Otherwise, error message
net
mode. Otherwise, this action will be recognized as
the weight reading, press
range. Otherwise, error message
TARE
button on scale or
NET
MODE. All subsequent readings are deviations from
TARE
button on scale or
HOLD
button on scale or
will keep flashing.
will flash.
on remote controller (when the
will keep flashing.
will flash.
TARE
OUT.
on remote controller (when
will keep flashing.
tare
in.
on remote controller.
STA/STR/STC
will flash.
gross