Tare Set; Resolution Switch - Baxtran STA Serie Manual De Usuario

User's Guide
The kg indicator lights on, after
CONDITION
The scale must not be in
The scale must be in
Please flip to System Unit of Scale Configuration in 6 Advanced Operation section in Technical
Manual for more information about scale's measurement system.
NOTICE:
DISPLAY UNIT SWITCH function only changes the unitScale does not save this setting un-
less SYSTEM UNIT is changed.

TARE SET

ACTION
Press 2ND
controller in turn (when the scale is in gross mode), to enter
Press ZERO
Press HOLD
FUNCTION
The scale stores the tare weight that user inputs, and shifts to
deviations from the tare value.
The screen displays "00000" (or "0000.0" or "000.00", depending on the resolution) with the first "0"
flashing, waiting for user's input.
To learn how to input digits, please refer to 5 User Input section.
CONDITION
The scale must not be in
The scale must be in
The input tare weight must be greater than 0 (or 0.0 or 0.00, depending on the resolution). Otherwise,
error message
The input tare weight must be lesser than scale's maximum capacity. Otherwise, error message
NOTICE:
Tare setting will reduce the apparent overloading range of the scale.
For example, if a 1000kg is set by tare set function, and the scale maximum capacity is
5000kg, the scale will overload at a new weight of 4009kg (5000 – 1000 + additional 9
divisions).
NOTICE:
Setting or changing TARE has no effect on the ZERO setting.

RESOLUTION SWITCH

ACTION
To switch scale's resolution, press
FUNCTION
The screen flashes the resolution to change in descending order, like 5kg, 2kg, 1kg (available optional
resolution ranges from 0.01 kg or lb to 50 kg or lb, depending on scale's capacity). After
switch, new resolution takes effect.
44
display unit
HOLD mode. Otherwise, error message
GROSS MODE. Otherwise, error message
button on scale or
and TARE button on scale or
button on scale or
HOLD mode. Otherwise, error message
GROSS MODE. Otherwise, error message
will flash.
will flash.
switches to kg.
on remote controller, and
and on remote controller to input the digits.
on remote controller to confirm the input value.
and on remote controller in turn.
will keep flashing.
will flash.
TARE button on scale or
TARE SET function.
NET MODE. All subsequent readings are
will keep flashing.
will flash.
STA/STR/STC
on remote
resolution