Faults - Probable Causes - Solutions - Riello RS BLU Serie Instrucciones De Instalación, Uso Y Mantenimiento

Faults - Probable causes - Solutions

8 Faults - Probable causes - Solutions
If faults arise in ignition or operations, the burner performs a "safety
stop", which is signalled by the red control box lockout LED.
The display visualises alternately the lockout code and the rela-
tive diagnostic. To reset the start-up conditions, refer to the "Re-
set procedure" indicated in the manual of the control box
REC27.100A2 supplied.
When the burner starts up again, the red LED goes out and the
control box is reset.
20040563 34 GB