Switching Bicycle Lights On/Off - Bosch Intuvia Manual Del Propietário

English – 8​
The push assistance function must only be used
u
when pushing the eBike. There is a risk of injury if
the wheels of the eBike are not in contact with the
ground while using the push assistance.
To activate the push assistance, briefly press the
WALK button on your on-board computer. After acti-
vation, press the + button within 3 s and keep it
pressed. The eBike drive is switched on.
Note: The push assistance cannot be activated at as-
sistance level OFF.
The push assistance is switched off as soon as one of
the following occurs:
– You release the + button;
– the wheels of the eBike are locked (e.g. by applying
the brakes or hitting an obstacle);
– the speed exceeds 3.7 mph.
The push assistance function is subject to local regu-
lations; the way it works may therefore differ from the
description above. It can also be deactivated.

Switching bicycle lights on/off

On the model where the bike lights are powered by
the eBike system, the front light and taillight can be
switched on and off at the same time via the on-board
computer.
0 275 U07 XD3 | (06.02.2019)
114
Bosch eBike Systems