Construction And Function; Combination Possibilities; Intended Use; Service Life - Ottobock 2Z500 Instrucciones De Uso

► Please read this document carefully before using the product and
observe the safety notices.
► Instruct the user in the safe use of the product.
► Please contact the manufacturer if you have questions about the
product or in case of problems.
► Report each serious incident in connection with the product, in particu­
lar a worsening of the state of health, to the manufacturer and to the
relevant authority in your country.
► Please keep this document for your records.

1.1 Construction and Function

The 2Z500 or 2Z501 Outer Soles are mounted on the 1E90 Sprinter Pros­
thetic Foot. The 2Z501 Outer Sole with spikes is used for running on an all-
weather running track while the 2Z500 Outer Sole without spikes is for all
other surfaces.

1.2 Combination Possibilities

Designation
Prosthetic foot

2 Intended use

2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
2.2 Area of application
Approved for a body weight of up to 125 kg.
2.3 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e.g. talcum)

2.4 Service life

The product is a wear part, which means it is subject to normal wear and
tear.
Reference Number
1E90 Sprinter
11