Value Table For Factory Setting; Btl7 Configuration Tool; Connecting The Usb Communication Box - Balluff BTL7-C508-M Serie Manual De Instrucciones

BTL7-C/E5_ _-M _ _ _ _ -P-S32/KA _ _
Magnetostrictive Linear Position Sensor – Profile Style
6
Configuration with the BTL7 Configuration Tool
6.1

Value table for factory setting

Output gradient
Rising BTL7-C...
BTL7-E...
Falling BTL7-C...
BTL7-E...
Tab. 6-1: Value table for factory settings
NOTICE
Interference in function
Configuration with the BTL7 Configuration Tool while the
system is running may result in malfunctions.
► Stop the system before configuration.
6.2

BTL7 Configuration Tool

The BTL can be quickly and easily configured on the PC
using the PC software BTL7 Configuration Tool.
The most important features include:
– Online display of the current position of the magnet
– Graphical support for setting the functions and curves
– Display of information on the connected BTL
– Selectable number formats and units for display
– Resetting to factory settings is possible
– Demo mode without a connected BTL
The PC software and associated manual can be
found in the Internet under www.balluff.com.
14 english
BTL Unit Min. value
mA
mA
mA 20.4
mA 20.4
Null value End value
0 0 20.0
3.2 4.0 20.0
20.0
20.0
6.3

Connecting the USB communication box

Beim BTL mit Steckverbinder muss die
Kommunikationsbox zwischen BTL und Steuerung
eingeschleift werden. The communication box is
connected to the PC via a USB cable.
Connection cable approx.
0.3 m with S32 (female)
connector
Fig. 6-1: Connecting the communication box with a connector
Beim BTL mit Kabelverbindung werden die
Kommunikationsleitungen La, Lb und GND mit der USB-
Kommunikationsbox verbunden.
USB cable
Fig. 6-2: Connecting the communication box with a cable connection
When reading or writing data via the
Configuration Tool, LED 2 flashes green.
Max. value Error value
20.4 20.4
20.4 20.4
0 0
4.0 3.2
USB cable
Connection cable
approx. 0.3 m with
S32 (male) connector
8-pin 6-pin
8-pin
Connection cable
approx. 0.6 m with
luster terminal
0
3.2
Controller
Controller