STERWINS 20 VGT2-28.1 Instrucciones De Montaje página 280

FR clothing that is loose fi tting or that has hanging cords or ties; they can be caught in
moving parts.
ES
• Do not wear loose clothing or jewellery that can be drawn into the air inlet.
• Secure long hair so it is above shoulder level to prevent entanglement in moving parts.
PT
• Wear hearing protection at all times while operating the product. The product is
extremely noisy and permanent hearing injury may result if instructions to limit
IT
exposure, reduce noise and wear hearing protection are not strictly followed.
• Wear full eye protection at all times while operating the product. The manufacturer
EL
strongly suggests a full face mask or fully enclosed goggles. Normal spectacles or
sunglasses are not adequate protection.
PL
• Before each use, ensure that all controls and safety devices function correctly. Do not use
the tool if the off switch does not stop the product.
RU
• Before each use, always inspect the housing for damage. Ensure that guards and
handles are in place and properly secured.
KZ
• Never operate the product with defective guards or shields, or without safety devices,
such as debris collector, in place.
UA
• Keep all cooling air inlets clear of debris.
RO
• Clear the work area before each use.
• Wear a face fi lter mask in dusty conditions to reduce the risk of injury associated with
BR
the inhalation of dust.
• Do not point the product in the direction of people or pets.
EN
• Do not operate the product near open windows, etc.
• Do not use the power tool if the switch does not turn it on and off . Any power tool that
cannot be controlled with switch is dangerous and must be repaired.
• Disconnect the battery pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may aff ect the power tool' s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
• Do not to touch moving hazardous parts before the machine is disconnected from the
mains and the moving hazardous parts have come to a complete stop.
282