Accessories Supplied With The Machine; Optional Accessories; Specified Conditions Of Use - SICE M 39 ATV Manual De Instrucciones

ENGLISH • Instructions manual

ACCESSORIES SUPPLIED WITH THE MACHINE

- Tyre arm
- Brush
- Plastic adaptors for go-kart wheels
- PP plastic protections for lever and bead breaking blade
- Wheel holder arm
- Tray
- Small diameter wheel mounting roller
- CE Inflator gun
- Vase of grease 1 Kg
- UCA clamp kit for cross motorcycle wheels
- KIT ATV clamp kit for ATV wheels
- KIT CC centering cone for ATV wheels
(only with wheel holder arm)
M 39 ATV tyre changer is designed exclusively for mounting and demounting tyres using the tools with which the machine is
equipped and in accordance with the instructions in this manual.
WARNING
Any other use other than the one described herein will be con-
sidered improper and unreasonable.
The machine is equipped with an inflation system that is independent
from the systems described above. Extreme caution must be exercised
during use of the machine inflation system (read INFLATION heading).
WARNING
When working with the machine it is strongly recommended to
avoid using equipment or tools not manufactured by SICE.
Figure 6 shows the positions assumed by the operator during the vari-
ous stages of work with the machine:
A Bead breaker
B Tyre demounting and mounting
C Inflation area
WARNING
To stop the machine in an emergency:
- unplug from the electrical supply;
- isolate the air supply network by disconnecting the shut-off
valve (quick fitting).

OPTIONAL ACCESSORIES

SPECIFIED CONDITIONS OF USE

27
A
C
B
M 39 ATV
6