Maintenance - SICE M 39 ATV Manual De Instrucciones

Desmontadora de neumaticos para ruedas de motociclo
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Table top doesn't turn. Motor whines
Motor runs two-phase.
- Replace inverter.
- Check that there are no detached wires on the plug, electrical socket, motor terminal board or inverter.
- Replace motor.
Gear unit noisy. The table top makes 1/3 of a revolution and then stops.
Gear unit seizing.
- Replace gear unit.
Table top fails to clamp wheels.
Table top cylinders defective.
- Replace table top cylinders.
Table top mounts or demounts tyres with difficulty
Insufficient belt tension.
- Adjust belt tension or replace it.
Vertical clamping inoperative.
Clamping plate not adjusted.
- Adjust clamping plate.
Clamping plate defective.
- Replace clamping plate.
Tyre pressure gauge needle fails to return to 0.
Pressure gauge faulty or damaged.
- Replace pressure gauge.
WARNING
The "spare parts" handbook does not authorise the user to carry out work on the machine with the exception of those operations explicitly
described in the user's manual, but enables the user to provide the technical assistance service with precise information, in order to reduce
delay.
WARNING
SICE declines all liability for claims deriving from the use of non-original spares and accessories.
WARNING
It is expressly forbidden to attempt to alter operating pressure of the relief valves or the pressure regulator.
The manufacturer declines all liability for damage resulting from tampering with these components.
WARNING
Before making any adjustments or carrying out maintenance, disconnect the electrical supply from the machine and
make sure that all moving parts are suitably immobilised.
WARNING
Do not remove or modify any parts of this machine (except in case of service interventions).
- The filter-pressure regulator-lubricator unit is equipped with a semi-automatic condensate drain device. The device operates
automatically whenever the compressed air supply is disconnected from the machine. Drain condensate manually when the
level rises above maximum mark.
- Clean the table top weekly: remove any residues of dirt. Use only with environment-friendly detergents.
M 39 ATV

MAINTENANCE

34
ENGLISH • Instructions manual

Publicidad

Tabla de contenido
loading

Tabla de contenido