Main Operating Parts Of The Machine - SICE M 39 ATV Manual De Instrucciones

MAIN OPERATING PARTS OF THE MACHINE

WARNING
Get to know your machine: the best way to prevent accidents and obtain top performance from the machine is to ensure
that all operators know how the machine works.
Learn the function and location of all commands.
Carefully check that all the commands on the machine are working properly.
To avoid accidents and injury, the machine must be installed properly, operated correctly and serviced regularly.
A HORIZONTAL SWING ARM – moves the mount/demount device and the table top vertical slide away for the removal and
replacement of tyres or rims.
B
VERTICAL SLIDE ARM – for the positioning of the mount/demount device.
C MOUNT/DEMOUNT DEVICE – for mounting-demounting the tyre on the rim.
E
TABLE TOP – rotating device for clamping the wheels.
F
TABLE TOP PEDAL – three-position pedal that controls the rotation of the table top in both directions.
G
CLAMP CONTROL PEDAL - three-position pedal for opening, closing and moving rim clamps.
H
BEAD BREAKER PEDAL – two-position pedal for operation of bead breaker
L BEAD BREAKER SHOE – mobile shoe for detaching bead from rim.
M
LEVER – for locking the vertical slide arm after finding the exact position of the C-device.
N
KNOB – for setting the horizontal swing arm and keeping the C-device/rim distance
O TRAY
P
INFLATOR GUN
Q
WHEEL SUPPORT – on which the wheel is rested during the bead breaking phase.
R
MOUNTING ROLLER – for mounting wheels with diameter smaller than 8".
M 39 ATV
R
28
ENGLISH • Instructions manual
M
P
O
5