Unit Preparation; Amplitude Lock Feature - DJO chattanooga VitalStim Therapy Manual De Instrucciones

SETUP

Unit Preparation

After electrodes are placed on the patient
per the VitalStim Cerification Training
Materials, turn the unit on by depressing
the On/Off button once.
Set each Channel's intensity by pressing
the intensity Up or Down arrow until the
prescribed intensity is visible in the LCD
display.
NOTE:
Electrodes must be secured to patient for
amplitude to be set above 10.0 mA.
Place the unit in the Anti-Shock pouch
and close securely with the hook and
loop straps.

AMPLITUDE LOCK FEATURE

The Amplitude Lock Feature will
automatically turn on after the Amplitude
has been set and left undisturbed for
approximately 30 seconds. This prevents
accidental changes in the prescribed
Amplitude Setting during a therapy
session.
To turn off the Amplitude Lock feature,
press the down arrow for either channel,
then re-adjust amplitude as desired.
8
VitalStim™ Therapy Unit