Troubleshooting; Ce Declaration Of Conformity - Triton TWX7CS001 Instrucciones De Uso

Troubleshooting

Problem
No function when On/Off Switch is operated
Poor cutting quality
Cutting profiles are inconsistent with measurements
Bevel angle setting is loose
Guarantee
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless indicated otherwise) for information on future releases.
Details provided will not be made available to any third party.
Purchase Record
Date of Purchase: ___ / ___ / ____
Model: TWX7CS001

CE Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: Triton
Declares that
Identification code: TWX7CS001
Description: Contractor Saw Module
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU
• IEC 61029-1:1990
• IEC 61029-2-1:1993
• EN55014-1:2006+A1:2009+A2:2011
• EN55014-2:1997+A1:2001+A2:2008
• EN61000-3-2:2014
• EN61000-3-3:2013
Possible cause
Power overload tripped circuit breaker
Defective ON/OFF Switch
Defective blade
Supporting Protractor Gauge (41) or Rip Fence (51) insufficiently fastened
Saw Blade (2) not calibrated
Sacrificial wood on Protractor Gauge (41) no longer provides sufficient
support
Rear Bevel Angle Locking Nut (55) is loose
Retain your receipt as proof of purchase
Triton Precision Power Tools guarantees to the purchaser of this product that if any part proves to be defective due
to faulty materials or workmanship within 3 YEARS from the date of original purchase,
Triton will repair, or at its discretion replace, the faulty part free of charge.
This guarantee does not apply to commercial use nor does it extend to normal wear and tear or damage as a result
of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights
Notified body: TÜV Rheinland
The technical documentation is kept by: Triton
Date: 31/08/2016
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address: Powerbox, Boundary Way, Lufton
Trading Estate, Yeovil, Somerset, BA22 8HZ, United Kingdom.
Solution
Press the Reset Button (54), found on the underside of the Power Inlet Box
(53), then test with the ON/OFF Switch
Replace the ON/OFF Switch at an authorised Triton service centre
The blade will need replacing, see 'Saw blade replacement' for instructions
on how to replace the saw blade
Refasten supporting fences and ensure there is no movement when pressure
is applied
Calibrate the Saw Blade using the method described under 'Blade
calibration'
Replace the sacrificial wood piece
Tighten the Rear Bevel Angle Locking Nut
GB
7