Replacing the Toner Cartridge/Drum Unit
Toner Cartridge
When toner runs out completely and prints can no
longer be made, <OUT OF TONER/CHANGE
TONER> appears on the LCD display. Follow the
procedure described below to help you replace the
toner cartridge.
1
Open the front cover.
2
Pull the toner cartridge lever (A) towards you.
A
CAUTION
Do not pull the toner cartridge out until <OUT OF
TONER/CHANGE TONER> appears on the LCD display.
49
3
Turn the lever as far as it will go clockwise.
4
Pull the cartridge out of the machine.
CAUTION
Do not shake the used toner cartridge or hold it in a
vertical position. Doing so may cause the toner to spill.
Put the toner cartridge in the original plastic case for
disposal.
5
Remove the plastic case from the box.
6
Open the case and remove the new toner
cartridge.
CAUTION
– Do not touch the portions (A) and (B).
– Do not pull out the seal (C) before inserting the
cartridge into the machine as the toner may spill out.
A
C
B
7
Pull the toner cartridge lever (A) towards you
and insert the cartridge into the machine with
the arrow (B) pointing towards the machine.
B
A
8
Holding the cartridge steady with one hand,
pull out the seal completely with the other
hand.
50