Paper Jams - Canon iR1018 Serie Guia De Inicio Rapido

Ocultar thumbs Ver también para iR1018 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Paper Jams

When <PAPER JAM> appears on the LCD display,
remove jammed paper from inside the machine
first, then from the paper drawer if necessary.
Check the following if you experience repeated
paper jams:
– Even the edge of the paper stack by a flat
surface before loading it in the machine.
– Check that the paper you are using meets the
requirements for use. (See Chapter 3, "Print
Media," in the Basic Operation Guide.)
– Make sure you have removed any scraps of
paper from inside the machine.
1
Open the left cover.
55
2
Carefully pull the jammed paper out of the
machine.
A
CAUTION
– Do not touch the fixing assembly (A) as it becomes
very hot during use.
– If you tear the paper, remove any torn pieces to avoid
further jams.
– If loose toner comes into contact with your skin or
clothing, wash with cold water. Warm water will set the
toner.
3
Tilt the 2-sided transport guide (A) toward the
machine, then remove the jammed paper (Only
for 2-sided copying).
A
4
Lift and hold the transcription frame (A), then
remove the jammed paper (Only for 2-sided
copying).
A
5
Close the left cover.
CAUTION
Be careful not to get your fingers caught.
6
If you use the optional paper drawer, open the
cover on the left side of the optional paper
drawer. Remove any jammed paper, then close
the cover.
7
Pull out the paper drawer and push the corners
of the stack under the tabs.
8
Gently push the paper drawer back into the
machine until it clicks.
CAUTION
Be careful not to get your fingers caught.
56

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ir1022 serie

Tabla de contenido