Specifications; Temperature Settings; Capacity - Amica AWDM6I X-TYPE Manual De Instrucciones

Note:
• During parameters setting,you can press other function keys to
change the function among
• Before closing the door,you can touch
the appliance will go back to waiting state.
• During the process of working, open the door to enter to the pa-
rameters adjusting mode. And then press
temperature. You can press the
which you want to adjust. And then press
• After saving the setting as above, you can press
waiting state, or close the door to start working.

Specifications

1. When the appliance is electrified, open the door. The buzzer will ring
once and the appliance will enter to waiting state. "0" will display.
2. In the process of clock setting, if there is no operation within 3 min-
ute, the oven will go back to the waiting state.
3. The buzzer sounds once by efficient press.
4. The buzzer will sound thrice to remind you when cooking is finished.

Temperature settings

Each function has its own temperature range. The factory-set rec-
ommended temperatures are printed in bold. The temperature can
be altered in 5° steps. The last temperature selected is automatically
activated the next time the drawer is switched on, and this is shown in
the display
* Approximate temperature values, measured in the middle of the
drawer when empty

Capacity

The quantity that can be loaded will depend to a great extent on the
size and weight of your own crockery. Do not overload the drawer.
The maximum load bearing capacity of the drawer is 25 kg. Under the
maximum load bearing capacity, the drawer should be opened or closed
slightly.
, and
or
Temperature °C*
40 60
45 65
50 70
55 75
60 80
- 19 -
.
to cancel the setting. And
or to adjust the
to change the parameter
to save the setting.
to enter to the
60
65
70
75
80