Presentation; Description - Chauvin Arnoux C.A 5260G Manual De Instrucciones

1. PRESENTATION ................................................................... 13
2. DESCRIPTION ....................................................................... 13
3. AC AND DC VOLTAGES ........................................................ 15
4. CONTINUITY ET RESISTANCE ............................................. 16
5. TEST DIODE .......................................................................... 16
6. TEMPÉRATURE ..................................................................... 17
7. CAPACITANCE ...................................................................... 18
8. AC AND DC CURRENTS ....................................................... 18
9. GENERAL SPECIFICATION .................................................. 19
10. MAINTENANCE ..................................................................... 20
11. WARRANTY ........................................................................... 20
12. TO ORDER ............................................................................. 21
13. APPENDIX ............................................................................. 53
The C.A 5260 multimeter is designed to meet everyday
engineering needs.
- 4000 count display
- Automatic range selection (V, Ω)
- Automatic shut-down after 30 minutes without use
- Continual use possible (see HOLD)
Specification of the K sensor as supplied:
- measurement range: -40°C to +2000°C - class 1 - 1.10 m long
Different measurement accessories increase the range of
applications to which you can apply your multimeter and it
can be given new add-on functions.
See section "12. To Order" for the list of accessories and their
reference (Documentation supplied on demand).
NB: Always use accessories suited to the voltage and the
overload category of the measurement circuit
(complying with NF EN 61010).
(see fig. in 13. Annexe)
Liquid Crystal Display
4000 counts (digit height 12 mm)
Automatic display of all the command, range and function
symbols
Battery low indicator:
Displays OL if range is exceeded
NB 1 : When switching on, all the display symbols appear
for around 0.5 seconds. Similarly between functions V and
and if HOLD is activated between
NB 2 : RANGE displayed in TEMP, µF and MIN/MAX.
SUMMARY

1. PRESENTATION

2. DESCRIPTION

13
and .