Specification And Tool's; Standard Wheelchair Specifications; Tools For Adjustments And Regular Maintenance; (Not Supplied) - Invacare Alu Lite Manual Del Usuario

5. Push against the transport chair and determine if the wheel
brake engages the wheel brake shoe enough to hold the
transport chair.
6. Repeat the above procedures until the wheel brake holds
the transport chair.
7. Repeat STEPS 1-6 for the opposite wheel brake.
3. Specifications and tool's

3.1. Standard wheelchair specifications

Maximum user weight :
Seat width :
Seat depth :
18
Floor/seat height :
Rear wheel :
Castors :
Parking brake :
Backrest :
Armrests :
Footrest supports :
Seat upholstery :
Frame :
Wheelchair average weight :
100 kg
40,5 / 45,5 cm
43 cm
49 cm
12" (305 mm) solid tyre
8" (200 mm) solid tyre
Attendant brake
Folding
Fixed
Removable and swing-away
Black nylon
on reinforced upholstery
Aluminium, epoxy coated
12 kg

3.2. Tools for adjustments and regular maintenance

(not supplied)

Function
Brake
Footrest tube
Armpad
Castor
After sale and disposal recommendations
• It is compulsary to use original Invacare
you can buy through any Invacare
• For repair, please contact your local Invacare
• Disposal : the metal parts can be disposed of for scrap
metal through recycling. Plastic parts are disposed of as
plastic scrap. Disposal must be carried out in accordance
with the respective national regulation. Please apply to your
municipal authorities/local government for details about local
disposal companies.
Tool
8 mm open-end Wrench
13 mm open-end Wrench
Screwdriver Pozidriv n°2
5 mm Allen key
13 mm open-end Wrench
spare parts which
®
dealer.
®
dealer.
®