Section 3-Operation; Adjusting The Propel Back Depth And Angle - Invacare InTouch Propel Manual Del Usuario

SECTION 3—OPERATION
SECTION 3—OPERATION
WARNING
Check ALL fasteners periodically to ensure that mechanical connections and
attaching hardware are tightened securely - otherwise injury or damage may occur.
DO NOT continue to use this product if problems are discovered. Corrective main-
tenance can be performed at or arranged through your equipment supplier.

Adjusting the Propel Back Depth and Angle

NOTE: For this procedure, refer to FIGURE 3.1.
1. Loosen, but DO NOT remove, the hex bolts securing the back tab to the cane mounting
brackets on both sides.
2. Adjust the back to the desired angle and/or depth.
NOTE: Use the measurement marks for as a reference to align the left and right sides.
3. Tighten the hex bolts securing the back tabs to the cane mounting brackets.
DETAIL "A" - BACK ANGLE
AND DEPTH
Depth
1.75"
Angle
27°
Back Tab
Hex Bolts
Back Tab
Plate
Back Tab
Cane Mounting
Plate
Bracket
Cane Mounting
Bracket
Measurement
Marks
FIGURE 3.1 Adjusting the Propel Back Depth and Angle
™ ™ 14
InTouch Propel Back Part No 1143199