JVC InteriArt Natural Vision T-V LINK AV-32WFT1EP Manual De Instrucciones página 16

                        
To display the PICTURE SETTING menu:


1
Press the button to display MENU
(main menu).


2
Press the button to choose PICTURE
SETTING, and press the




 




 
You can select one of three TINT modes (three kinds of pic-
ture settings) to adjust the picture settings automatically.


1
Press the buttons to choose TINT.

2
Press buttons to choose a mode.
COOL:
A cool white colour base with a boost in the colour and
contrast levels that creates a more vivid picture.
WARM:
A warm orange/red colour base that creates the appro-
priate colour and contrast levels for watching films.
NORMAL:
A normal white colour base with normal colour and con-
trast levels.


3
Press the button to complete the set-
ting.
The menu disappears.
                                               
You can change the picture settings of each TINT mode as
you like.
The picture settings changed are stored in the TINT mode.


1
Press the buttons to choose an item.

2
Press the buttons to change the set-
ting.

Lower
CONTRAST
(picture contrast)
Darker
BRIGHT
(picture brightness)
Softer
SHARP
(picture sharpness)
Lighter
COLOUR
(picture colour)
Reddish
(picture hue)
     


button.

Item
Higher
Brighter
Sharper
Deeper
Greenish
HUE
Note:
• You can change the HUE setting (picture hue) only
when the colour system is NTSC 3.58 or NTSC 4.43.
To return to the default settings in each TINT
mode:
Press the blue button.
Returns the picture settings in the currently chosen TINT
mode to the default settings, and stores them in the TINT
mode again.


3
Press the button to complete the set-
tings.
The menu disappears.
                           
When you set the ECO MODE function to ON, the screen
contrast is automatically adjusted to a setting suitable for the
brightness of your room. This reduces eye strain for you and
the power consumption of the TV.


1
Press buttons to choose ECO MODE.

2
Press buttons to choose ON.
To cancel the ECO MODE function:


Press buttons to choose OFF.


3
Press the button to complete the set-
ting.
The menu disappears.
Note:
• If you set the ECO MODE function to ON, the ECO lamp
lights.