JVC InteriArt Natural Vision T-V LINK AV-32WFT1EP Manual De Instrucciones página 20

                      
To display EXT SETTING menu:


1
Press the button to display MENU
(main menu).


2
Press the button to choose EXT SET-
TING. Then press the
  & & & &     ' ' ' '                             ( ( ( (         ) ) ) )
 
When connecting a device (such as S-VHS VCR) which en-
ables an S-VIDEO signal (Y/C signal) to be output, you can
enjoy high-quality picture of the S-VIDEO signal (Y/C signal).
Preparation:
• At first, read the Device Instruction Manual and "ADDITION-
AL PREPARATION" on page 30 to connect the device to the
TV properly. Second, follow the Device Instruction Manual
to set the device so that a S-VIDEO signal (Y/C signal) can
be output to the TV.
• Do not set
(S-VIDEO input) to the EXT terminal con-
nected to a device which cannot output a S-VIDEO (Y/C sig-
nal). If it is set wrongly, a picture cannot appear.
Press the  buttons or
buttons to
1
choose an EXT terminal.
EXT-1
P
EXT-3
EXT-4
P
TV
Press the yellow button and set the 
2
(S-VIDEO input).
A (S-VIDEO input) mark is displayed. You can view
an S-VIDEO signal (Y/C signal) instead of the regular
video signal (composite signal).
To cancel the   (S-VIDEO input) setting:
 
Press the yellow button and turn off
put) mark.
The regular video signal (composite signal) pictures are
resumed.


button.
EXT-2
  
(S-VIDEO in-


3
Press the button to complete the set-
ting.
The menu disappears.
Note:
• The EXT-1 terminal does not support S-VIDEO signal
(Y/C signal) and you cannot set
in the EXT-1 terminal.
• Setting
(S-VIDEO input) changes the head
character from "E" to "S". For example, "E2" is
changed to "S2".
• Even an device which enables the S-VIDEO signal (Y/
C signal) to be output may output a regular video sig-
nal (composite signal) depending on the device set-
ting. If a picture cannot appear because
VIDEO input) setting has been made, read the device
Instruction Manual carefully again to check for the de-
vice settings.
           




You can have a name corresponding to the devices connect-
ed for each EXT terminal. Giving a name to an EXT terminal
makes the EXT terminal number appear on the screen, to-
gether with the name.


1
Press the buttons or
choose an EXT terminal.
EXT-1
P
EXT-3
EXT-4
P
TV
2
Press the blue button to display the name
list (LIST).
(S-VIDEO input)
(S-

buttons to
EXT-2