Additional Menu Operations - JVC InteriArt Natural Vision T-V LINK AV-32WFT1EP Manual De Instrucciones

6
Press the button to complete the set-
ting.
The T-V LINK menu appears.
7
Follow the operating procedure "Down-
loading the data to VCR" on page 28 to
transmit the Programme number (PR) data
to the VCR.
8
If you have another TV channel capable of
being unscrambled with a Decoder, repeat
steps 2 through 7.
Note:
• If for some reason the DECODER (EXT-2) function
has been set to "ON" but the TV channel cannot be
unscrambled, check the following:
− Has the Decoder been connected to the VCR
properly according to the VCR and Decoder In-
struction Manuals?
− Has the Decoder power been turned on?
− Can the TV channel be unscrambled with a De-
coder?
− Is it necessary to change the VCR settings in or-
der to connect the Decoder? Confirm that the
VCR is set properly by rechecking the VCR In-
struction Manual.

ADDITIONAL MENU OPERATIONS

' ' ' '                                     ' ' ' '         ( ( ( (     $ $ $ $ % % % %     & & & &                
Turn off the SPEAKER function so that TV speakers will not
issue any sound.





1.
Press the button to display the MENU
(main menu).



2.


Press the buttons to choose SOUND
SETTING. Then press the
play the SOUND SETTING menu.
The SOUND SETTING menu appears.





3.
Press the buttons to choose SPEAK-
ER. Then press the
OFF.
The sound from the TV speakers are cut.





4.
Press the button to complete the set-
tings.
The menu disappears.
Note:
• The   buttons of the TV remote control and the 
 
(volume) buttons at the front panel of your TV set can be
used to control the volume of each speaker simultane-
ously.
• Setting the volume of the amplifier too high may damage
the front speakers.






button to dis-
   
buttons to choose