custom installations Drawings are included in this manual to facilitate special installations and
serial number The serial number for your power amplifier is found on the rear of the unit.
register your purchase! Having found the serial number, now would be a good time to fill out the
operating voltage The CA-M400 power amplifier is set at the factory (internally) for 100V, 120V,
Warning:
custom cabinetry (see the section Dimensions). An optional, purpose-designed
rack mount kit is available for this product. Contact your Classé dealer for more
information.
Please note and record this number on the page entitled Important Safety
Instructions for your future reference.
registration card. Please register your purchase so we can advise you of updates
and other items of interest.
It will take only a minute or so. Please complete the card now, before you forget.
230V, or 240V AC mains operation, as appropriate for the country in which
it is to be sold (230V only in European Union countries, in compliance with CE
regulations). The voltage setting may not be changed by the user or dealer.
Make sure that the label on the rear panel of your power amplifier indicates
the correct AC operating voltage for your location. Attempting to operate your
power amplifier at an incorrect voltage may damage the unit.
The voltage setting of your power amplifier may not be changed
by the user. There are no user-serviceable parts within the
unit. Please refer any problems to an authorized Classé service
center.
If the AC mains voltage indicated on your power amplifier is incorrect, please
contact your local, authorized Classé dealer or distributor.
The CA-M400 can easily be powered by a normal 15-ampere AC mains line.
If other devices are also powered from the same AC line, their additional power
consumption should be taken into account.
7